Cleaning and Process Validation in Cleanrooms: Is Paper Still the Only Alternative?
How can validation results be recorded in a cleanroom without compromising contamination control?
For many years, there was essentially one answer: paper.
However, with advances in technology and electronic records, an increasing number of companies are adopting new strategies for executing protocols directly in the field.
The question is no longer “Can technology be used?”
The right question is:
What is the most appropriate strategy to ensure contamination control, data integrity, and operational efficiency?

Paper is still widely used
In many companies, the process still follows this workflow:
- Printing the protocol
- Transferring the material into the classified area in accordance with internal procedures
- Manually recording the results
- Reviewing the documentation
- Archiving the records
This is a well-established process that teams are familiar with.
However, there is an important aspect that is often overlooked.
A common misconception is that only electronic equipment poses a risk in cleanroom environments.
In reality, any material introduced into the area should be assessed from a contamination control perspective.
This includes paper itself.
Conventional office paper is generally not used in classified areas.
Depending on the criticality of the environment, specific materials may be used, such as:
- Cleanroom paper
- Low-particle-shedding paper
- Materials supplied sterile or compatible with the company’s established transfer procedures.
The challenge is not the paper. Nor is it the tablet.
The discussion is often framed as a choice between paper and electronic devices.
In practice, this is not the most appropriate approach.
The objective should always be to reduce risk.
While paper requires controls related to particle generation and the introduction of materials into the area, electronic devices must be demonstrated to be compatible with the cleaning, disinfection, and operational requirements of that environment.
For this reason, the decision typically involves a risk-based assessment that considers, among other factors:
- Area classification (Grade A, B, C, or D);
- The Contamination Control Strategy (CCS);
- Ease of cleaning and disinfection;
- Compatibility with sanitizing agents;
- Ergonomics when used with gloves;
- Connectivity;
- Particle generation;
- Electronic records requirements, where applicable.
There is no universally “approved” device. There is an appropriate solution for each process.
How is the industry evolving?
More and more organizations are replacing some of their paper-based records with digital solutions.
Strategies currently adopted across the industry include:
- industrial tablets designed for regulated environments;
- dedicated mobile devices that remain permanently inside the cleanroom;
- commercial tablets with specific protective solutions, when supported by a risk assessment;
- mobile workstations (trolleys) equipped with industrial computers;
- direct integration with MES, EBR, LIMS, and validation platforms.
What benefits can be achieved?
When properly implemented, digital execution can provide several benefits:
- elimination of duplicate data entry;
- reduction in transcription errors;
- immediate attachment of evidence;
- complete traceability;
- greater alignment with Data Integrity principles;
- faster review by Quality Assurance;
- greater availability of information for audits and investigations.
Survey Results: Is paper still the only option in classified areas?
The discussion generated so much interest that we decided to go beyond the theoretical reflection in our previous post and hear directly from those who experience this routine on the shop floor. We gathered responses from professionals in validation, quality, and operations — and the results confirm something we suspected: the transition from paper to digital has already begun, but it remains partial and uneven across cleanroom classes.
Paper still dominates — especially in Class C and D areas
When we asked which strategy is used in Class A and B areas, paper-based protocols accounted for 37% of the responses, closely followed by devices that remain permanently inside the cleanroom (21%) and Cleanroom Paper (16%). It is worth noting that 37% selected "not applicable" — suggesting that many operations simply do not perform activities in these more critical classes.
In Class C and D areas, the picture changes significantly: 79% still use conventional paper-based protocols. In other words, the lower the area classification, the greater the reliance on paper — the opposite of what one might expect, since these areas generally have fewer restrictions on introducing electronic devices.
How are results actually recorded?
This was perhaps the most revealing question. We asked how validation results are recorded in practice:
of companies still go through some paper-based step before final recordkeeping.
Precisely the rework that digital execution promises to eliminate.
What is the biggest challenge today?
We also asked respondents to identify their main current challenge (multiple answers allowed). Two topics tied for first place, each cited by 53% of respondents.
The key is ensuring traceability and reducing document review rework, regardless of the medium used.
The most striking finding: what if you were starting from scratch today?
Here is the most interesting finding from the survey. We asked: if your company were designing a new facility today, which strategy would you adopt?
In other words, even though many companies' current reality is still predominantly paper-based — especially in Class C and D areas — when the decision is free from legacy systems and historical constraints, nearly 3 out of 4 professionals would choose the digital path.
What does this tell us?
The survey confirms what we had already pointed out: resistance to digitalization is not, in most cases, a technical decision or a genuine preference. Rather, it results from legacy infrastructure, established processes, and restrictions specific to each area. When these constraints are removed, the industry's preference becomes clear.
The path toward reducing reliance on paper — and addressing the data integrity and document review challenges that come with it — lies in rethinking the validation process from end to end, rather than simply replacing paper with a device.
Does this reflect your reality too?
GO!FIVE® was developed precisely to support this transition by centralizing protocols, evidence, deviations, and approvals in a single digital environment, with full process traceability.
GO!FIVE® is a platform designed to support the management and digital execution of validation and qualification activities, including Process Validation and Cleaning Validation.
By using devices that are compatible with the strategy established for the classified area, protocols can be executed directly in GO!FIVE®, allowing records to be captured digitally as the activities are performed.
This makes it possible to centralize information, evidence, results, deviations, reviews, and approvals within a single environment, reducing manual steps and increasing traceability throughout the validation process.
Therefore, the transformation is not simply about replacing paper with a tablet.
It is about rethinking the validation process from end to end, combining contamination control, data integrity, traceability, and operational efficiency.
